This is the VampowerPro Four Port Quad Charger, 110V Version.

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The VP4AC-80 can output up to 80Watts/7Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 80Watts/7Amps on a port in no way limits any of the other ports ability to charge to its full potential! Max the charger out by using 80Watts/7Amps on each port at the same time for a total of 320Watts!

Reliability:
VampowerPro is known for their great reliability and affordable performance. They use the best internal components and circuitry available to create long lasting products. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 80Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers an 7Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery's cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cells voltage.

Menu Options:

• LiPo Battery, LiIon Battery, LiFe Battery
  • Charge
  • Balance Charge (Balances cells inside of battery for optimal performance & safety)
  • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
  • Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V)
• NiMh
  • Manual Charge (Manually set charge amperage)
  • Auto Charge (Set amperage limit, charger will auto adjust)
  • Discharge (Voltage adjustable from 0.1V-24.0V)
  • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
• NiCd
  • Manual Charge (Manually set charge amperage)
  • Auto Charge (Set amperage limit, charger will auto adjust)
  • Discharge (Voltage adjustable from 0.1V-24.0V)
  • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
• Pb (Lead Acid batteries such as the battery in your car)
  • Charge
  • Discharge
• Digital Power
  • Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
  • Amperage adjustable from 0.1A-8.0A
  • Voltage Adjustable from 3.0V-24.0V
• User Settings
  • Precharge Time
  • Wait Time (between charge & discharge cycles, 1-60min)
  • NiMh Peak Sensitivity
  • NiCd Peak Sensitivity
  • Temp Cutoff
  • Safety Timer
  • Capacity Cutoff
  • Input Power Low Voltage Cutoff
  • Key Beep and Buzzer Sound (On or Off)
  • Back Light (0%-100%)
  • Factory Reset